HOME

 
 
PhotoEtch

Resin Model Kits

PE-001
DLM Quonos One
$45.00
 Quonus One Klingon Empire Fleet Flagship as seen in Star Trek:The Undiscovered Country.

Now the final details to create an authentic 1/537 Klingon Flagship of the Empire can be realized with finely etched brass details.  Nearly 80 separate parts... Etched into a .030 gage brass sheet.  These details fit onto the models by using a self adhesive glues like MicroScales Metal Foil adhesive and CA glues.  This brass is much thinner that most model PE sets.  Some minor bending to make parts curves is required.

Click an Image to Enlarge

Need the Resin parts?  Check them out HERE

(see Packages JTR-P02; P02-C and P04) 

Back To Top

PE-002
Shuttlecraft Hanger (TOS) - 1/650 scale
$24.50
Add a shuttlebay and greatly enhance the realism of the most famous starship ever created ... and one of the most popular models of all time.

Since you don't have to make any modifications to the original kit, this upgrade is suitable for use with nearly all currently available enhancements (i.e. lighting kits, decals, etc.).

Strategically placed holes allow the main observation rooms to be lit without the LEDs being visible.

Most portions of this kit are suitable for novice photoetch users.

 

 

Click an Image to Enlarge

Need Decals?  Check them out HERE (JTG-000, JTG-G06 and JTG-027)

Resin parts?   Check them out HERE (JTR-023, 24, 25, 26, 27, 29, 30, & 33)

 

Back To Top

PE-003 Enterprise Accurizing Set (TOS) - 1/650 scale
$28.50
Add the exterior enhancements to really make your Enterprise shine and ... Finally includes the bridge!

The only modification necessary to use this detail set is cutting a hole in the top of the primary hull to show the bridge. This is made even easier since we include a "washer" that fits in place to block lighting and provide a perfectly circular opening.

This super-detailed set includes:  Accurate warp engine grills, including rear extensions (scaled slightly for production),  Accurate warp engine pylon grills (again, scaled slightly for production), Bussard collector "rotors", suitable for lighting and compatible with the VooDooFX lighting kit — designed with the cooperation of VooDooFX,  Impulse engine exhausts suitable for lighting — match the new look of the CGI Enterprise, scaled to use with the included kit decals, Side details for the front of the secondary hull,  The primary hull triangles, sized to match the Enterprise decals from JT Graphics — designed with the cooperation of JT Graphics,  Light blocking ring for the upper dome,  Two piece bridge!

 

Click an Image to Enlarge

Need Decals?  Check them out HERE  (JTG-000, JTG-G06 and JTG-027)

Resin parts?   Check them out HERE (JTR-023, 24, 25, 26, 27, 29, 30, & 33)

 

Back To Top

PE-004 Refit Enterprise Enhancements - 1/350 scale
$37.50
Designed specifically for the Polar Lights 1:350th scale Refit Enterprise model, this photoetch set includes everything you'd expect (crew, shuttlebay girders, window frames), plus many that you wouldn't. At over 5.5 by 8.5 inches, this huge fret is an amazing bargain.

This super-detailed set includes:
Impulse engine grills*,  Crew — both standing;  singles, and mounted groups to cast shadows behind the oval windows;  Girders and railings for the shuttlebay, including pieces to hide the seams at the two "steps";  Shuttlebay doors;  The lighted ring around the deflector dish;  The rec deck — in forced perspective so that it actually fits within the available space and looks correct;  The airlock that Kirk exits through in ST:TMP — with the option for an open or closed outer hatch;  Work bee add—ons: two cargo sleds and two sets of work arms*;  Properly sized airlock doors;  Hatches for the Vulcan shuttles, and transport pods*;  Gangway door for the port side of the primary hull;  End caps for the warp engines;  Window frames for the rec deck, officers lounge, and arboretum; 

* - These parts suitable for use with either the original kit parts or the upgraded items available from Don's Light and Magic.

 

Click an Image to Enlarge

Need Decals?  Check them out HERE

(JTG-PL08-A and JTG-PL08-B)

Back To Top

PE-005 Refit Enterprise Enhancements - 1/1000 scale
$27.50
A photoetch set for the new 1:1000 scale Refit Enterprise from Polar Lights / Round 2. This PE set is intended for modelers of moderate experience as there is a lot of cutting involved to mount the shuttlebay. Yes, you read correctly - we're including a tiny 1:1000 scale shuttlebay (TMP version — no cargo area, though), along with the arboretum, window frames for the officers lounge and arboretum and ... drilling guides for the primary hull edge windows. (Plus a lot of other pieces.)

 

Click an Image to Enlarge

Need Decals?  Check them out HERE

(JTG-PL10)

Back To Top

PE-006 Galaxy Class Phasers and Transporter Emitters - 1400 scale
$45.00
From Don's Light and Magic, Dress up that Galaxy Class with some detailed brass.  This sheet allows you to add detail to the phaser and transporter emitters.  

 

Click an Image to Enlarge

Need Decals?  Check them out HERE

(JTG-010 and JTG-011)

Back To Top

PE-007 650 Starship Details - 650 scale
$20.00
Similar to PE-003 but better suited to be used with JT-Graphics Resin Replacement parts. This sheet covers the external detail with a slight modification or two.  If you are using our parts to spruce up you kit, consider adding ja little bit more detail to make it outstanding !

 

  

Click an Image to Enlarge

Need Decals?  Check them out HERE

Resin Parts?  Check them out HERE

Back To Top

PE-008 Hatches - Leif Ericson/INterplanetary UFO - 500 scale
$8.00
Decals are kind of flat.  So why not add a little more 3D to you model.  These hatches are the same as and can be used with the decals.  Add a little something to teh old girl and make her come alive. 

 

  

Click an Image to Enlarge

Need Decals?  Check them out HERE

Back To Top

PE-009 K'Tinga Impulse Grills - 537 scale
$8.00
The kit Impulse Engines look a little...bland.  Why not add a bit of detail.  This etch provides you the grills and includes decals for either red or blue exhaust or drill out the kit part and light'em up.  

 

  

Click an Image to Enlarge

Need Accurate Resin Parts?  Check them out HERE

Back To Top

PE-010 Oberth (Grissom) Vents - 537 scale
$15.00
Photo Etch vents for the edges of the main hull and the pylons.  Can be used with the old Sci-Fi Spaceship Miniatures Science Class (USS Grissom) or the RRP Survey Class Starship. 

 

  

Click an Image to Enlarge

Need a RRP kit?  Check them out HERE

Back To Top

PE-011 Raptor Tread Plate - 1/32 scale
$26.00
Bad-Azz kits are some of the most detailed resin kits available, but ever they can use a little help from time to time.  This etch provides you with interior floor diamond plate and tread for the wings.

 

  

Click an Image to Enlarge

Need a Raptor Kit?  Check them out HERE

Back To Top

PE-012 Quonos One Impulse Grills - 537 scale
$8.00
When we designed our Quonos One parts we never expected for them to be lit.  Now, with a slight modification to the resin parts, you can light those Impulse Engines up.    

 

  

Click an Image to Enlarge

Need Accurate Resin Parts?  Check them out HERE

Back To Top

     
     
     
     
     
     
     
     



Hoowdy!