|
|
JTR-023
|
|
$6.00
|
|
|
|
TOS End Caps - 1st Pilot
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar.
|
|
|
Want to build a 1st Pilot version of the USS Enterprise? You’ll need these nacelle End Caps. They have the ‘ring’ cast in place making attachment easy.
Just cut the ring off the end of the nacelle, insert, align and glue into place. (Two Pieces).
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-024 |
|
$6.00
|
|
|
|
TOS End Caps - 2nd Pilot
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Want to build a 2nd Pilot version of the USS Enterprise? You’ll need these nacelle End Caps. They have the ‘ring’ cast in place making
attachment easy. Just cut the ring off the end of the nacelle, insert, align and glue into place. (Two Pieces)
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-025
|
|
$6.00
|
|
|
|
TOS End Caps - Production
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar.
|
|
|
More Accurate representations of the kit supplied nacelle End Caps. The “balls” have been reset and look much better than the kit
supplied part. Plus no ‘drop’outs’ from the injection molding process. They have the ‘ring’ cast in place making attachment
easy. Just cut the ring off the end of the nacelle, insert, align and glue into place. (Two Pieces)
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-026
|
|
$8.00 |
|
|
|
TOS Deflector Housing
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar.
|
|
|
This piece has the correct number of rings and offset distance from the housing exterior. A wonderful part to make your kit look more
accurate.
|
|
|
|
|
|
|
Back To Top
|
|
|
JTR-027
|
|
$6.00
|
|
|
|
TOS Deflector Dish - Production
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar.
|
|
|
This two part piece is a wonderful addition to any TOS kit. Much more accurate than the kit supplied part.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-028 |
|
$8.00
|
|
|
|
Endeavour Class Deflector Housing
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
A Movie Era feel in a TOS part. Use this housing to modify your Enterprise into another starship class or to just customize your ship.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-028-C |
|
$15.00
|
|
|
|
Endeavour Class Deflector Housing (clear blue)
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
A Movie Era feel in a TOS part. Molded in Clear Blue resin for Lighting. Use this housing to modify your Enterprise into another starship
class or to just customize your ship.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-029 |
|
$5.00
|
|
|
|
TOS Planetary Sensor
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
An accurate representation of the Planetary Sensor. This part is one piece and includes alignment pins just like the kit part
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-030 |
|
$8.00
|
|
|
|
TOS Control Reactors
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
New, more accurate Control Reactors to replace the in-accurate kit parts. 2 pieces per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-031 |
|
$8.00
|
|
|
|
Saucer Mounted Deflector Arm/Dish #1
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Modeled after the Deflector Arm shown in a famous Technical Manual, this piece is great for creating a Destroyer/Scout, Tug or your own ship
design. This part includes alignment pins and plugs directly into the bottom of the saucer!
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-032 |
|
$8.00
|
|
|
|
Saucer Mounted Deflector Arm/Dish #2
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Another design for the Deflector Arm. Use it for re-creating a Destroyer,/Scout, Tug or a ship of your own design. This part
includes alignment pins and plugs directly into the bottom of the saucer!
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-033 |
|
$25.00
|
|
|
|
18" TOS Bussard Collectors
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
The measurements for these new caps were taken directly from the original 11' model and scaled to fit. Plus there is a detailed
insert designed to replicate the "fan" blades. Clear resin domes are included that "lock" into the housing. Also includes
accurate flux chillers. (Special thanks to Gary Kerr for his help in obtaining the actual measurements). 2 per pack.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-035 |
|
$8.00
|
|
|
|
Romulan BOP Engine Details
| |
|
For the RRP/SFSM 650 scale Romulan Bird of Prey model kit or similar. |
|
|
Now you can dress up that Vacuum Form Bird of Prey a bit with these NEW engine details. The fronts allow you to place the clear dome in
place without having to worry about alignment. The rears (2 slightly different versions) will help align the nacelle halves
and easily center the Aluminum exhaust.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-035-C
|
|
$15.00
|
|
|
|
Romulan BOP Engine Details - Clear
| |
|
For the RRP/SFSM 650 scale Romulan Bird of Prey model kit or similar. |
|
|
Now you can dress up that Vacuum Form Bird of Prey a bit with these NEW engine details. The fronts allow you to place the clear dome in
place without having to worry about alignment. The rears (2 slightly different versions) will help align the nacelle halves
and easily center the Aluminum exhaust.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-041
|
|
$25.00
|
|
|
|
18" TOS Custom Bussard Collectors #1
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Custom Bussard Collectors to personalize, modify or create your own TOS Engine design. Comes with clear domes. 2 per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-042 |
|
$6.00
|
|
|
|
18" TOS Custom End Cap #1
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Custom End Caps to personalize, modify or create your own TOS Engine design 2 per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-043 |
|
$6.00
|
|
|
|
18" TOS Custom End Cap #2
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Custom End Caps to personalize, modify or create your own TOS Engine design. 2 per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-044 |
|
$15.00
|
|
|
|
18" TOS Bridge and B/C Deck - Production
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Accurate Replacement Production Bridge and B/C Deck for the old 18" TOS kit.
Just cut off the existing and drop into the open hole. The new piece includes a flange to help with alignment and the front
and back will rest on the top of the saucer. Includes a clear dome in cease you want to show off Paragrafx's
photo etched bridge.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-045 |
|
$4.00
|
|
|
|
18" TOS Nacelle Vents
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Accurate vents for the rear of the nacelle. Fit snuggly into the holes in the nacelle left by removing molded vents. 4 per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-046 |
|
$15.00
|
|
|
|
18" TOS Custom "K" Bussards
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Customized Bussard Collectors modeled after those used on the USS Kelvin in the 2009 movie. 2 per package as shown.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-047
|
|
$6.00
|
|
|
|
18" TOS Custom "K" End Cap
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Customized end caps modeled after those used on the USS Kelvin in the 2009 movie. 2 per package as shown.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-048
|
|
$8.00
|
|
|
|
18" Light and Hanger Domes
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Non lighting but clear (red, green and clear) domes to simulate the lighting domes on the ship. Also includes the missing dome for over the shuttle bay cast in
clear.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-049
|
|
$8.00
|
|
|
|
18" Intercoolers - Pilot
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Custom Bussard Collectors to personalize, modify or create your own TOS Engine design. Comes with clear domes. 2 per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-050
|
|
$8.00
|
|
|
|
18" Intercoolers - Production
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Replacement intercoolers for your Production nacelles. Correct proportions and designed to fit wit no modification.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-051
|
|
$15.00
|
|
|
|
18" TOS Pilot Bussard Collectors #1
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Pilot Styled Bussard Collectors. Use to create a 1st or 2nd Pilot Enterprise or for kit bashing. Combine with other Nacelle End Caps on th to
personalize, modify or create your own TOS Engine design. 2 per package.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-054
|
|
$20.00
|
|
|
|
Custom Deflector Dish and Housing (opaque)
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Customize that Secondary Hull with this JJprise inspired Deflector Dish and Housing.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-054-C
|
|
$25.00
|
|
|
|
18" Custom Deflector Dish and Housing (clear blue)
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Customize that Secondary Hull with this JJprise inspired Deflector Dish and Housing.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-056
|
|
$10.00
|
|
|
|
Galileo Shuttlecraft
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
A 650 scale TOS Shuttlecraft to match the 18" TOS Enterprise. Whether you scratch build a shuttlebay, or you use the Paragrafx Photo Etch Shuttlebay.
This piece is 3D printed and not a cast. |
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-060
|
|
$5.00
|
|
|
|
Custom Planetary Sensor Dome
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Another customizing part for the old 18" Starship. This past comes with 2 pins on the bottom so it aligns perfectly to the kit saucer.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-061
|
|
$8.00
|
|
|
|
Custom Intercoolers
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Customize those nacelles. 4 new Intercoolers to dress up the detail on your ship.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-064 |
|
$7.00
|
|
|
|
TOS Deflector Dish - Pilot
| |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
For those wishing to make the USS Enterprise from
the Pilot episode. The Larger dish can
also be used for Kit bashing.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-065 |
|
$25.00
|
|
|
|
18" TOS Custom Bussard Collector #2 | |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
These bussard Collectors capture elements of
both the TOS Enterprise and JJ-Prise USS Kelvin.
Would look great with the JTR-043 End Caps
above.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-066 |
|
$15.00
|
|
|
|
18" TOS Pilot Bridge and B/C Deck | |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Pilot version of the B/C Deck and Bridge.
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-067 |
|
$8.00
|
|
|
|
18" TOS Custom B/C Deck | |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
This
Custom B/C Deck capture elements of
both the TOS and Refit Enterprises.
Consider using one of teh available Custom
Bridges we offer (JTR-068 and 069 below).
|
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-068 |
|
$10.00
|
|
|
|
18" TOS Custom Bridge #1 | |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
This
Custom Bridge replaces the current molded in
place Bridge or can be used with JTR-067.
Opaque base with a clear dome. |
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-069 |
|
$10.00
|
|
|
|
18" TOS Custom Bridge #2 | |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
This is a Crossover between the Refit
and the TOS Bridges. It replaces the current
molded in place Bridge or can be used with
JTR-067. Opaque base with a clear dome. |
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
JTR-077 |
|
$20.00
|
|
|
|
18" TOS Custom Pylons | |
|
For the AMT/Ertl 650 scale USS Enterprise model kit #6676 or similar. |
|
|
Add some stlte to your Customization of that old
Constellation Class ship. Cross between
TOS and TMP Pylons. These pylons plug
directly into the Secondary Hull mounts.
The Nacelle modifications are slight (remover
the eisting pylong and drill a 1/8in hole per
instructions.
These pylong have Brass
Rectangle tube so they shouldn't sag. Plus
it's a convienent way to run some wire if you
choose to light your it. |
|
|
|
|
|
Click an Image to Enlarge
|
|
Back To Top
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|