 |
|
| 1:537 | 1/537 scale Starship parts - Here is a selection of resin products for a variety of starships and Sci-Fi Models. Great for accurizing, customizing and/or adding detail. If ordering for a specific model. please check to be sure you are ordering the proper parts |
| JTR-003 | $10.00 | |
| Quad Photon Launchers | ||
| For the Thomas Models 537 scale P/T Destroyer Conversion with the AMT/Ertl 537 scale USS Enterprise model kit #6676 or similar. | ||
A more detailed replacement for the conversion kit part or as a piece to use when kit bashing. Now you can increase your ships fire power! 2 pieces per package. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-004 | $15.00 | |
| Saucer Mounted Photon Launchers | ||
| For the AMT/Ertl 537 scale USS Enterprise model kit #6676 or similar. | ||
Remove those front windows and replace them with some fire power! A detailed piece for your next kit bash. 2 per package (Right and Left). |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-007 | $18.00 | |
| K’tinga/Quonos One Replacement Bridge (opaque) | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
| A highly detailed replacement bridge and deck for your Movie Era Klingon Battle Cruiser. The part that the AMT/Ertl kit should have had. You can create the ST6:UC Quonos One but removing the bridge dome and replacing it with the cap provided. |
 |
|
)
Click an Image to Enlarge |
||
| JTR-007-C | $25.00 | |
| K’tinga/Quonos One Replacement Bridge (clear) | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed replacement bridge and deck for your Movie Era Klingon Battle Cruiser. The part that the AMT/Ertl kit should have had. You can create the ST6:UC Quonos One but removing the bridge dome and replacing it with the cap provided. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-008 | $8.00 | |
| Quonos One Grill Inserts | ||
| For the AMT/Ertl Klingon Cruiser model kit #6682 or similar. | ||
A highly detailed part to create the ST6:UC Quonos One. These pieces fit into the sides of the secondary hull edge grill work. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-009 | $8.00 | |
| K’tinga/Quonos One Disrupters | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed part that AMT/Ertl forgot! You can use it to accurize you K’tinga or Quonos One. Comes with brass wire and bending guide. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-010 | $8.00 | |
| Quonos One Dome | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed part to create the ST6:UC Quonos One. These piece replaces the dome on the underside of the secondary hull. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-011 | $50.00 | |
| Quonos One Replacement Nacelles (opaque) | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed replacement parts to create the ST6:UC Quonos One. These pieces replace the kit supplied WARP Nacelles. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-011-C - DISCONTINUED | $50.00 | |
| Quonos One Replacement Nacelles (clear green) | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed replacement parts to create the ST6:UC Quonos One. These pieces replace the kit supplied WARP Nacelles. Molded in for Lighting. This Item has been discontinued. By using the opaque version and cutting out the "grill" area it allows you more room inside the nacell for lighting. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-012 | $8.00 | |
| Quonos One Corners & Grill | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed parts to aid in creating the ST6:UC Quonos One. The corners simply fit over the front top corners of the secondary hull. The grill piece the top center of the ribbed section in front of the shuttlebay. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-013 | 8.00 | |
| Quonos One Impulse | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
A highly detailed parts to aid in creating the ST6:UC Quonos One. To will need to modify the current rear impulse piece in order to add these details. Simply sand off the detail shown in the instructions and place the new pieces over top. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-014 | $8.00 | |
| K’tinga/Quonos One Shuttlebay and Disruptors | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
For your Movie Era Klingon Battle Cruiser or Quonos One, a highly detailed replacement piece for the Shuttlebay doors. This piece has the proper lower angle and requires only a slight modification of the main Shuttlebay. You also get 2 disruptor canons. One for each side of the Shuttlebay. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-015 | $12.00 | |
| K’tinga/Quonos One Manifolds | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
For your Movie Era Klingon Battle Cruiser or Quonos One, corrected replacement pieces for the sides of the Shuttlebay. These pieces have the proper details require only a slight modification of the Shuttlebay door piece. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-016 | $20.00 | |
| K’Tinga/Quonos One Replacement Neck | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
For your Movie Era Klingon Battle Cruiser or Quonos One. Correctly detailed replacement neck and front plate. These pieces have the proper details. The Neck contains a brass tube that for running wire if you decide to light your kit. |
 |
|
){kind=small}
)
Click an Image to Enlarge |
||
| JTR-018 | $6.00 | |
| Oberth Impulse Crystal | ||
| For the Sci-Fi Spaceship Miniatures Survey Class model kit or similar. | ||
This piece replaces the Impulse Deflection Crystal riser on the top behind the bridge dome. Base is cast in opaque resin with 2 clear blue crystals for lighting. |
 |
|
)
)
)
Click an Image to Enlarge |
||
| JTR-019 | $6.00 | |
| Oberth Rear Detail | ||
| For the Sci-Fi Spaceship Miniatures Survey Class model kit or similar. | ||
This piece replaces Decals that goes along the rear edge of the main platform. Simply cut away the back wals and glue in place. |
 |
|
)
Click an Image to Enlarge |
||
| JTR-020 | $10.00 | |
| Oberth WARP Fins | ||
| For the Sci-Fi Spaceship Miniatures Survey Class model kit or similar. | ||
These pieces replace the WARP Fins that you need to construct from Sheet Styrene. Simply glue in place and be on your way. |
 |
|
)
Click an Image to Enlarge |
||
| JTR-022 | $5.00 | |
| Oberth Impulse Exhaust (opaque) | ||
| For the Sci-Fi Spaceship Miniatures Survey Class model kit or similar. | ||
These pieces replace the Impulse Exhaust on a Survey Class Starship. Simply glue in place and be on your way. |
 |
|
)
Click an Image to Enlarge |
||
| JTR-022-C | $10.00 | |
| Oberth Impulse Exhaust (opaque) | ||
| For the Sci-Fi Spaceship Miniatures Survey Class model kit or similar. | ||
These pieces replace the Impulse Exhaust on a Survey Class Starship. Simply glue in place and be on your way. |
 |
|
)
Click an Image to Enlarge |
||
| JTR-038 | $15.00 | |
| Klingon "Bulb" (opaque) | ||
| For the AMT/Ertl Klingon Cruiser model kit #6682 or similar. | ||
Finally a corrected "bulb" for the Klingon Battle Cruiser. This part will work for either the K'Tinga or Quonos One version of the ship. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-038-C | $25.00 | |
| Klingon "Bulb" (clear) | ||
| For the AMT/Ertl Klingon Cruiser model kit #6682 or similar. | ||
Finally a corrected "bulb" for the Klingon Battle Cruiser. This part will work for either the K'Tinga or Quonos One version of the ship and is clear for lighting. |
 |
|
)
Click an Image to Enlarge |
||
| JTR-039 | $5.00 | |
| Klingon Torpedo Detail | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
Finally a detailed piece for the Klingon Torpedo tube. Comes with a clear RED resin "emitter" and a piece of styrene tube. Ready for lighting or not. A great addition to your kit. This part will work for either the K'Tinga or Quonos One version of the ship. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-040 | $5.00 | |
| Klingon Edge Vents | ||
| For the AMT/Ertl Klingon Cruiser model kit or similar. | ||
New edge vents for the rear "wings" of the Klingon battle Cruiser. Now you don't need to try to putty up that seam. Just sand off the old and put in the new. This part will work for either the K'Tinga or Quonos One version of the ship. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-055 | $5.00 | |
| Oberth nacelle Ridge and Light | ||
| For the Sci-Fi Spaceship Miniatures Survey Class model kit or similar. | ||
The ridge on the top of the kit nacelle leaves a little to be desired. So replace it with this new part. It even has navigational lights in the front and rear. |
 |
|
){kind=small}
)
Click an Image to Enlarge |
||
| JTR-062 | $30.00 | |
| 22" TOS Bussard Collectors | ||
| For the AMT/Ertl Cut-Away USS Enterprise model kit or similar. | ||
The measurements for these new caps were taken directly from the original 11' model and scaled to fit. Plus there is a detailed insert designed to replicate the "fan" blades. Clear resin domes are included that "lock" into the housing. Also includes accurate flux chillers. (Special thanks to Gary Kerr for his help in obtaining the actual measurements). 2 per pack. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-063 | $8.00 | |
| 22" TOS End Caps - Production | ||
| For the AMT/Ertl Cut-Away USS Enterprise model kit or similar. | ||
More Accurate representations of the kit supplied nacelle End Caps. The “balls” have been reset and look much better than the kit supplied part. Plus no ‘drop’outs’ from the injection molding process. They have the ‘ring’ cast in place making attachment easy. Just cut the ring off the end of the nacelle, insert, align and glue into place. (Two Pieces) |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-071 | $10.00 | |
| 22" Light and Hanger Domes | ||
| For the AMT/Ertl Cut-Away USS Enterprise model kit or similar. | ||
Non lighting but clear (red, green and clear) domes to simulate the lighting domes on the ship. Also includes the missing dome for over the shuttle bay cast in clear. |
 |
|
)
)
Click an Image to Enlarge |
||
| JTR-078 | $20.00 | |
| 22" B/C Deck and Bridge | ||
| For the AMT/Ertl Cut-Away USS Enterprise model kit or similar. | ||
Correctly shapped and scaled, this piece is a nice addition if you are building this as a "Non" Cut-Away. Comes with a clear Bridge Dome and inset windows. |
 |
|
|
Click an Image to Enlarge |
||
| JTR-079 | $8.00 | |
| 22" Planetary Sensor | ||
| For the AMT/Ertl Cut-Away USS Enterprise model kit or similar. | ||
Correctly shapped and scaled, this piece is a nice addition if you are building this as a "Non" Cut-Away. Just cut the old one off and align and glue into place. |
 |
|
|
Click an Image to Enlarge |
||
| JTR-080 | $8.00 | |
| 22" Production Deflector Dish | ||
| For the AMT/Ertl Cut-Away USS Enterprise model kit or similar. | ||
The it part was lacking so modified and scaled up our 650 scale Deflector Dish. |
 |
|
|
Click an Image to Enlarge |
||